ERROR/MESSAGE ERROR/MESSAGE ERROR/MESSAGE ERROR/MESSAGE ERROR/ NO FILE SPECIFIED FOR ACTION -- SELECT A FILE DIAGRAM TYPE INCONSISTENT WITH SCREEN DISPLAY -- RESET OUTPUT INCORRECT HARDWARE SETUP -- CHECK CONFIGURATION (GRAPHICS CARD) PRINTER IS NOT READY -- CHECK PAPER SUPPLY OR ON-LINE SWITCH DOS ERROR READING FILE -- REPLACE DATA DISK OR USE BACKUP ERROR READING DIRECTORY -- USE "CHANGE DIRECTORY" TO RESET UNABLE TO DELETE FILE -- CHECK DATA DISK UNABLE TO RENAME FILE -- CHECK DATA DISK OR USE DIFFERENT NAME INCORRECT DOS VERSION -- EXTERNAL PROGRAM CONTROL NEEDS 3.0 OR >FLOW CHART IS TOO BIG IN FULL MODE -- CHANGE MODE AND TRY AGAIN INCORRECT IF BLOCK STRUCTURE -- CORRECT ERROR AND TRY AGAIN INCORRECT SWITCH BLOCK STRUCTURE -- CORRECT ERROR AND TRY AGAIN NO DIAGRAM TYPE SPECIFIED FOR ACTION -- SET DIAGRAM TYPE MORE THAN 2,048 FUNCTIONS IN FILE(S) -- REDO THE LIST FILE RESET DIRECTORY FAILED -- CHECK PATH AND FILE SPECIFICATIONS TWO DIAGRAM TYPES SELECTED FOR DISPLAY -- DO ONE TYPE AT A TIME EXTERNAL PROGRAM FILE ACCESS DENIED BY DOS -- CHECK EXTERNALS PATH SPECIFICATION ERROR FOR DATA BUFFER -- CHECK BUFFERS INSUFFICIENT MEMORY TO LOAD EXTERNAL PROGRAM -- REMOVE TSRs Non-Functional DIAGRAM TYPE INCONSISTENT WITH PCX OR PIC FORMAT -- RESET OUTPUT NO FUNCTIONS SPECIFIED FOR FLOW CHART -- SELECT WITH [F9] NO FUNCTIONS SPECIFIED FOR TREE CHART -- SELECT WITH [F9] EXTERNAL PREPROCESSOR FATAL ERROR -- CHECK .i FILE, LAST LINE 2,048 SYMBOLS LIMITATION EXCEEDED -- DECREASE NUMBER OF LEVELS DATA BUFFER IS TOO SMALL TO CREATE TEMP FILES -- FREE K 2,048 SYMBOLS LIMITATION EXCEEDED -- SPLIT THE PROGRAM GRAPHICS BUFFER IS TOO SMALL TO WRITE TEMP FILES -- FREE K NON-ASCII SOURCE CODE FILE -- CHECK SELECTED FILE CONTENTS NON-MATCHING BRACES FOUND -- CORRECT ERROR AND TRY AGAIN PATH SPECIFICATION ERROR FOR FILE BUFFER -- CHECK BUFFERS NON-ACCESSIBLE CODE ENCOUNTERED -- CORRECT ERROR AND TRY AGAIN INCORRECT BREAK POSITION FOUND -- CORRECT ERROR AND TRY AGAIN PATH SPECIFICATION ERROR FOR GRAPHICS BUFFER -- CHECK BUFFERS INVALID SYNTAX FOUND -- CORRECT ERROR AND TRY AGAIN FILE NOT FOUND -- CHECK DIRECTORY AND "FILES TO LIST" TREE CHART IS TOO BIG VERTICALLY -- TRY WITH DIFFERENT SETTINGS INSUFFICIENT MEMORY FOR PARSING -- REMOVE TSRs BACKGROUND PRINT IN PROGRESS -- WAIT UNTIL DONE OR TERMINATE INCORRECT CONTINUE POSITION FOUND -- CORRECT ERROR AND TRY AGAIN WRONG COMMENT LOCATION -- CORRECT ERROR AND TRY AGAIN EXTERNAL PREPROCESSOR NOT FOUND -- MAKE SURE IT IS IN THE PATH FILE BUFFER TOO SMALL TO CREATE OUTPUT FILE(S) -- FREE K MORE THAN 64 CASE STATEMENTS FOR ONE SWITCH -- LIMIT EXCEEDED NO FUNCTIONS FOUND IN FILE(S) -- INVALID SELECTION FOR CLEAR NO FUNCTIONS SPECIFIED FOR CROSS REFERENCE -- SELECT WITH [F9] MISSING WHILE STATEMENT -- CORRECT ERROR AND TRY AGAIN FLOW CHART DICTIONARY FILE IS MISSING -- CHECK SYSTEM DIRECTORY TREE CHART IS TOO BIG HORIZONTALLY -- TRY DIFFERENT SETTINGS FLOW CHART IS TOO BIG IN CONTROL MODE - TRY COMPRESSED OR LOGIC FLOW CHART IS TOO BIG VERTICALLY -- TRY REDUCED SIZE FLOW CHART VERTICAL SIZE LIMITATION EXCEEDED - SPLIT THE PROGRAM MISSING TEMPORARY DATA FILES -- RESELECT THE FILE AND TRY AGAIN INSUFFICIENT MEMORY TO PLOT FULL PAGE -- REMOVE TSRs IMPORTANT INCLUDE FILE MISSING - CHECK ARGUMENT FOR PREPROCESSOR FILE PROCESSING DID NOT COMPLETE -- CORRECT ERROR IN INPUT FILE INVALID CALCULATION FOUND DURING PREPROCESSING -- CORRECT ERROR S1HELPCHOICES Set parameters / Generate diagrams Select, rename & delete files / Change and list file directory Define configuration, language, dictionary, preprocessor / Save Jump to DOS / Reconfigure / Run external applications / Quit S2HELPCHOICES Flow chart, tree chart, source print, cross ref, prototype <Cr> Screen display, printer, or file (PRINT, PCX, PIC) output <Cr> Flow chart mode, comments, font size, FlowStyle, size <Cr> Tree chart levels, comments, extrnl, shading, rotate, size <Cr> Source print logic lines, line #'s, chars/line, margin <Cr> Title arrangement submenu <Cr> Paging, legend, # of copies, page orientation, resolution <Cr> Flash page display templates for review <Cr> Perform specified actions <Cr> Specify a source code or list file <Cr> Mark functions for flow, tree, source print, or cross ref <Cr> Set working directory & files to list for file operations <Cr> Display the list of files in the working directory <Cr> Rename a file in the working directory <Cr> Permanently erase a file from the working directory <Cr> Hardware and environment configuration submenu <Cr> Select language (Microsoft C, Turbo C, or Generic C) <Cr> Select Language or Internal preprocessor, or deactivate <Cr> Select flow chart dictionary for the current language <Cr> Edit current flow chart dictionary for symbol assignment <Cr> Save current parameters and settings submenu <Cr> Jump to DOS / type "EXIT" to return and restore selections <Cr> Run hardware and environment reconfiguration utility <Cr> Run external Text Editor and return to CLEAR <Cr> Run external Application and return to CLEAR <Cr> Run external Publishing program and return to CLEAR <Cr> Leave CLEAR and exit to DOS <Cr> S3HELPCHOICES SELECT FLOW-CHART, TREE-CHART OR FORMATTED SOURCE PRINT Toggle flow chart <Cr> (only ONE diagram type for display) Toggle tree chart <Cr> (only ONE diagram type for display) Toggle source print <Cr> (hardcopy or PRINT file only) Toggle cross reference <Cr> (hardcopy of PRINT file only) Toggle prototype file <Cr> (hardcopy or PRINT file only) CHOOSE WHITE-ON-BLACK OR BLACK-ON-WHITE SCREEN, OR PRINTER Select screen, printer, or binary, PCX, or PIC file output <Cr> SELECT AUTOMATIC, FULL, OR COMPRESSED DIAGRAM MODE Toggle full, control, compressed, or logic flow chart mode <Cr> Toggle small or standard character size for flow charts <Cr> Toggle marked flow chart comments <Cr> Toggle three choices for flow chart FlowStyle algorithm <Cr> Toggle normal or reduced diagram size for flow chart <Cr> NUMBER OF LEVELS & SHADING Toggle number of levels with <+>, <->, or number from 2 to 8 Toggle shading for tree chart <Cr> Toggle external (library or missing) functions for tree <Cr> Toggle marked tree chart comments <Cr> Toggle box rotation for tree chart <Cr> / <+>, <->, or number Toggle normal or reduced diagram size for tree chart <Cr> SELECT SOURCE PRINT OPTIONS Toggle logic block lines type for formatted source print <Cr> Toggle comments only for formatted source print <Cr> Toggle line numbering for formatted source print <Cr> Select # of characters per line for source print <Cr> or <Tab> Set the left page margin with <+>, <->, or number from 0 to 9 DEFINE TITLE ARRANGEMENT Toggle user title <Cr> / <Tab> to modify Toggle description comment <Cr> / <Tab> to modify Toggle project name <Cr> / <Tab> to modify Toggle programmer name <Cr> / <Tab> to modify Toggle company name <Cr> / <Tab> to modify Toggle time and date stamp <Cr> HARDCOPY OPTIONS Toggle paging for flow chart and tree chart <Cr> Toggle borders for flow charts and tree charts Toggle landscape or portrait page orientation <Cr> Toggle legend for flow charts and tree charts <Cr> Set number of copies to be printed with <+>,<-> or enter number Toggle high or low resolution for tree and flow charts <Cr> CONFIGURATION Select graphics buffer by toggling the four choices <Cr> Select data buffer by toggling the four choices <Cr> Select file buffer by toggling four choices <Cr> Toggle primary or secondary printer <Cr> Toggle printer port <Cr> Toggle letter, wide, or custom paper size <Cr> SAVE SETTINGS" Save current settings from the ACTIONS menu as the default <Cr> Save working directory and "FILES TO LIST" as the default <Cr> Save current title arrangement as the default <Cr> Save current environment (from Configuration) as default <Cr> Save language, preprocessor, and dictionary as the default <Cr> Save ALL current settings as the default <Cr> SPECIAL CASES HELP N1 N2 N3 Select functions for Flow chart, Tree chart, Source print, Cref Select file by cursor position and <Cr> / [F7] - enter directly Select file to rename by cursor position and press <Cr> Select file to delete by cursor position and press <Cr> Browse the list of files in the working directory A Select output device by cursor position and press <Cr> Select C language by cursor position and press <Cr> Specify preprocessor setting by cursor position and press <Cr> Select flow chart dictionary by cursor position and press <Cr> B Enter directory using DOS format, e.g C:\PATH\PATH Enter "FILES TO LIST" using DOS format, e.g. *.C or *.L Enter file name <Cr> / <Esc> to cancel C Page Preview / <PgUp> or <PgDn> for more / Any key to get back D
